Disclaimers

• NavQ as provided is an experimental board

• NXP Friendly Linux is experimental and in development

NXP, EMCRAFT AND SOFTWARECANNERY, provides the enclosed product(s) under the following conditions:

This reference design is intended for use of ENGINEERING DEVELOPMENT OR EVALUATION PURPOSES ONLY. It is provided as a sample IC pre-soldered to a printed circuit board to make it easier to access inputs, outputs, and supply terminals. This reference design may be used with any development system or other source of I/ O signals by simply connecting it to the host MCU or computer board via off-the-shelf cables. Final device in an application will be heavily dependent on proper printed circuit board layout and heat sinking design as well as attention to supply filtering, transient suppression, and I/O signal quality.

The goods provided may not be complete in terms of required design, marketing, and or manufacturing related protective considerations, including product safety measures typically found in the end product incorporating the goods. Due to the open construction of the product, it is the user's responsibility to take any and all appropriate precautions with regard to electrostatic discharge. In order to minimize risks associated with the customers applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards.

For any safety concerns, contact NXP, EMCRAFT AND SOFTWARECANNERY, sales and technical support services. Should this reference design not meet the specifications indicated in the kit, it may be returned within 30 days from the date of delivery and will be refunded replaced by a new kit. NXP, EMCRAFT AND SOFTWARECANNERY, reserves the right to make changes without further notice to any products herein.

NXP, EMCRAFT AND SOFTWARECANNERY, makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does NXP, EMCRAFT AND SOFTWARECANNERY, assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typical, must be validated for each customer application by customer’s technical experts.

NXP, EMCRAFT AND SOFTWARECANNERY, does not convey any license under its patent rights nor the rights of others. NXP, EMCRAFT AND SOFTWARECANNERY, products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the NXP, EMCRAFT AND SOFTWARECANNERY, product could create a situation where personal injury or death may occur.

Should the Buyer purchase or use NXP, EMCRAFT AND SOFTWARECANNERY, products for any such unintended or unauthorized application, the Buyer shall indemnify and hold NXP, EMCRAFT AND SOFTWARECANNERY, and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges NXP, EMCRAFT AND SOFTWARECANNERY, was negligent regarding the design or manufacture of the part.