> For the complete documentation index, see [llms.txt](https://nxp.gitbook.io/d2x/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://nxp.gitbook.io/d2x/d2x-board-rev1/modifications/enable-usb-otg.md).

# Enable USB-OTG

To make the USB-OTG work a jumper wire needs to be placed between the two pins marked with red arrow.

![](/files/-L9GM6Zsm4nbQthrVl1Y)

![](/files/-L9GM6ZtIa7xzVbgSkaU)

Picture of succesful modification

![](/files/-L9GM6ZuoPPBawUzXr-l)

![](/files/-L9GM6_-kFi_qfE2rHwg)