# Top Doors Assembly

## Video

{% embed url="https://youtu.be/yZsxumOeVsU" %}

## Bill of materials

{% embed url="https://a360.co/3n2w7mX" %}

## Procedure

1.  Grab one of the piano hinges and install it in place using six M3-0.5x5 button head cap screws.\


    <figure><img src="https://4122839187-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FVqrg7vhgChap4mjwTvH6%2Fuploads%2F7qy5qYvtmD4KatHkWr1L%2Fimage.png?alt=media&#x26;token=959ac7c3-25d3-4b0b-a9d7-dc256403d85b" alt=""><figcaption><p>Detail showing the location of the six mounting screws.</p></figcaption></figure>
2.  Grab the 2mm sheet metal separator and put it in the upper lip of the hinge.\




    <figure><img src="https://4122839187-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FVqrg7vhgChap4mjwTvH6%2Fuploads%2FsEUnERJkaZjqAgSFKfUN%2Fimage.png?alt=media&#x26;token=31f3bb9f-23ab-4939-b742-743c05935a5a" alt=""><figcaption></figcaption></figure>
3.  Then the insulator tray goes above the separator.\


    <figure><img src="https://4122839187-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FVqrg7vhgChap4mjwTvH6%2Fuploads%2FPcGyHY6dmRfUoIL2QgMQ%2Fimage.png?alt=media&#x26;token=06a45d0c-7fa9-4dda-98d1-42f2cb179a4d" alt=""><figcaption></figcaption></figure>
4.  And at last, put the doors above the insulator trays and assemble everything using six M3-0.5x12 button head cap screws, with locknuts and washers.\
    \


    <figure><img src="https://4122839187-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FVqrg7vhgChap4mjwTvH6%2Fuploads%2FKGGWTytxWpjuXeBVOM6L%2Fimage.png?alt=media&#x26;token=412fd004-b85d-42d9-b86f-fa7b1069e6f2" alt=""><figcaption></figcaption></figure>

    <figure><img src="https://4122839187-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FVqrg7vhgChap4mjwTvH6%2Fuploads%2FPgyamkoiaQGiqkVte7JW%2Fimage.png?alt=media&#x26;token=8873d846-355c-4a9d-95f2-811b33540b18" alt=""><figcaption></figcaption></figure>
5.  Use two M3-0.5x8 button head cap screws to install the door latches as follows.\




    <figure><img src="https://4122839187-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FVqrg7vhgChap4mjwTvH6%2Fuploads%2FFqfw9zZKwpdV2Hlm5QXl%2Fimage.png?alt=media&#x26;token=9fde9ea1-d3f7-4da4-8da0-4becd6ead65b" alt=""><figcaption></figcaption></figure>
6.  Fix the cylinder end of the gas strut to the chassis using three M3-0.5x5 button head cap screws.\


    <figure><img src="https://4122839187-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FVqrg7vhgChap4mjwTvH6%2Fuploads%2F04yXeyAhKxTnuNxVb8z7%2Fimage.png?alt=media&#x26;token=b398887f-3424-4b95-a844-15bf3b778648" alt=""><figcaption></figcaption></figure>

    <figure><img src="https://4122839187-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FVqrg7vhgChap4mjwTvH6%2Fuploads%2Fxjd1IHY20GpOU0sM3LSV%2Fimage.png?alt=media&#x26;token=c3e43890-f641-4b6a-870d-14d49a04c762" alt=""><figcaption></figcaption></figure>
7.  Now pull the rod out of the cylinder and mate the mounting bracket of the gas strut to the two mounting holes in the door.\


    <figure><img src="https://4122839187-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FVqrg7vhgChap4mjwTvH6%2Fuploads%2FIsTjx3iBuT9lR8dx3Bny%2Fezgif.com-video-to-gif%20(2).gif?alt=media&#x26;token=dc72d8f2-1ffb-4fd5-a2ef-f7aed1f5bc76" alt=""><figcaption></figcaption></figure>
8. Fix the cylinder rod to the doors using two M3-0.5x8 button head cap screws.
9.  At last, install the rubber edge trims as follows.\


    <figure><img src="https://4122839187-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FVqrg7vhgChap4mjwTvH6%2Fuploads%2F92I9f6QScs0fgNFEi5eI%2Fimage.png?alt=media&#x26;token=b5782cad-2717-40bf-8e0b-65b7580495a3" alt=""><figcaption></figcaption></figure>

## Assembly notes

{% hint style="warning" %}
Make sure to leave an opening for the electric locks when installing the rubber trims.
{% endhint %}
