# HG Drone User Guide

- [Getting started](/hovergames/userguide/getting-started.md): This page lists the most important parts of the HoverGames User Guide to get you started.
- [Drone kit contents](/hovergames/userguide/getting-started/drone-kit-contents.md): This page lists the contents of the HoverGames drone kit.
- [Not included items](/hovergames/userguide/getting-started/not-included-items.md): This page lists some parts that are not included in the HoverGames kit, but are required to use the HoverGames drone.
- [Assembly](/hovergames/userguide/assembly.md): This section guides you through the assembly of the drone kit with the LJI X4 500 drone frame.
- [Preparing the arms and motors](/hovergames/userguide/assembly/preparing-the-arms-and-motors.md): To get started, we will first assemble the motor mounts and arms.
- [Landing gear, PDB and rails](/hovergames/userguide/assembly/landing-gear-pdb-and-rails.md): Instructions for assembling the bottom part of the drone. This includes the power distribution board, landing gear, and the rails to which other components can be attached later.
- [ESCs, FMU power module and RC receiver](/hovergames/userguide/assembly/escs-fmu-power-module-and-rc-receiver.md): This page will explain how to mount the ESCs, the FMU power module and the RC receiver module.
- [FMU enclosure](/hovergames/userguide/assembly/fmu-enclosure.md): This page shows how the FMU is installed in its 3D printed enclosure.
- [Top plate, GPS, telemetry and FMU](/hovergames/userguide/assembly/top-plate-gps-telemetry-and-fmu.md): Before we put the last parts of the frame together, we should install some components on the top plate. We will install vibration dampers, the GPS mount, telemetry radio and the FMU itself.
- [Mounting the top plate and arms](/hovergames/userguide/assembly/mounting-the-top-plate-and-arms.md): This page explains how to mount the top plate and arms, as well as plugging in the motor cables.
- [Connecting all FMU wires](/hovergames/userguide/assembly/connecting-all-fmu-wires.md): This page provides an overview of how to connect all wires to the FMU.
- [Video tutorials](/hovergames/userguide/assembly/video-tutorials.md): An overview of all video tutorials for assembling the HoverGames drone.
- [Radio controller setup](/hovergames/userguide/radio-controller-setup.md): This page provides instructions on how to setup the FlySky FS-i6S RC transmitter that is included in the HoverGames drone kit.
- [RSSI - RC Radio Advanced configuration](/hovergames/userguide/radio-controller-setup/rssi-rc-radio-advanced-configuration.md)
- [Programming FMUK66 for first use](/hovergames/userguide/programming.md): The RDDRONE-FMUK66 board will not have any software loaded when turned on for the first time. This page explains how to load precompiled code for the PX4 bootloader and the NuttX/PX4 application.
- [PX4 configuration using QGroundControl](/hovergames/userguide/qgroundcontrol.md): This section will explain how to configure the PX4 software running on the RDDRONE-FMUK66.
- [Firmware](/hovergames/userguide/qgroundcontrol/firmware.md): How to upload firmware onto the RDDRONE-FMUK66 using QGroundControl.
- [Airframe](/hovergames/userguide/qgroundcontrol/airframe.md): Setting up the airframe configuration.
- [Sensors](/hovergames/userguide/qgroundcontrol/sensors.md): How to perform sensor calibration.
- [Radio and flight modes](/hovergames/userguide/qgroundcontrol/radio-and-flight-modes.md): How to set up the connection with your RC transmitter and configure different flight modes.
- [Power](/hovergames/userguide/qgroundcontrol/power.md): Options for battery management and voltage and current measurements.
- [Safety](/hovergames/userguide/qgroundcontrol/safety.md): Important safety and failsafe options.
- [Flying](/hovergames/userguide/flying.md): Tips for (safely) flying a drone.
- [Before you fly](/hovergames/userguide/flying/before-you-fly.md): Important things to check before you fly.
- [During flight](/hovergames/userguide/flying/during-flight.md): Things to keep in mind during the flight of your drone.
- [After you fly](/hovergames/userguide/flying/after-you-fly.md): Safely disarm your drone and analyze your flight.
- [Improving flight](/hovergames/userguide/flying/improvements.md): Some options to improve the flight characteristics of your drone.
- [Troubleshooting](/hovergames/userguide/troubleshooting.md): This page lists some frequently asked questions and problems that often occur, and how to solve these issues. Please have a look at this page before you ask for help in the community.
- [Flight time and Payload](/hovergames/userguide/flight-time-and-payload.md): Estimating parameters
- [User Tips and Tricks](/hovergames/userguide/user-tips-and-tricks.md): User contributed tips and tricks
- [Replacement parts, alternatives and upgrades](/hovergames/userguide/replacement-parts-alternatives-and-upgrades.md): This section provides an overview of replacement parts, as well as alternatives or upgrades for parts included in the HoverGames drone kit.
- [JST-GH connectors](/hovergames/userguide/replacement-parts-alternatives-and-upgrades/jst-gh-connectors.md): An overview of JST-GH contacts and connector housings
- [Replacement parts](/hovergames/userguide/replacement-parts-alternatives-and-upgrades/replacement-parts.md): An overview of suggested sources for replacement parts.
- [3D printable parts](/hovergames/userguide/replacement-parts-alternatives-and-upgrades/3d-printable-parts.md): Several 3D printable models have been designed to improve the user experience with RDDRONE-FMUK66 and the HoverGames drone kit. Some 3D printed parts are also included in the drone kit.
- [Specialty tools](/hovergames/userguide/replacement-parts-alternatives-and-upgrades/specialty-tools.md)
- [Upgrades and add-on components](/hovergames/userguide/replacement-parts-alternatives-and-upgrades/upgrades-and-add-on-components.md): An overview of commonly upgraded parts or possible add-ons to the HoverGames drone kit.