Connectors for providing RC input from a RC receiver module.
RDDRONE-FMUK66 Rev. C has a single RC input connector. It has PPM/SBUS, RSSI and Spektrum inputs, and a RC output that together with the PPM/SBUS input forms a UART TX/RX pair.
RDDRONE-FMUK66 Rev. B and older revisions had two connectors for input from the radio controller. The FRSKY port supports PPM and SBUS inputs and has telemetry output for an FrSky radio controller. The other connector, labelled RSSI/PPM, supports PPM, SBUS and Spektrum radio protocols. This port also has an RSSI input. FrSky telemetry is impossible when the PPM/SBUS input on either connector is also used.
Pin
Signal
Voltage
1
VCC
+5.0V
2
RC IN (PPM/SBUS)
+3.3V
3
RSSI IN
+3.3V
4
SPEKTRUM IN
+3.3V
5
RC OUT
+3.3V
6
GND
GND
Rev. B (and older boards) are not supported anymore. This information is left for reference.
Pin
Signal
Voltage
1
VCC
+5.0V
2
RC OUT (TELEM)
+3.3V
3
RC IN (PPM/SBUS)
+3.3V
4
GND
GND
Pin
Signal
Voltage
1
VCC
+5.0V
2
RC IN (PPM/SBUS)
+3.3V
3
RSSI IN
+3.3V
4
SPEKTRUM IN
+3.3V
5
GND
GND