> For the complete documentation index, see [llms.txt](https://nxp.gitbook.io/mr-b3rb/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://nxp.gitbook.io/mr-b3rb/introduction/what-is-needed-from-the-box.md). # What is needed from the box? | PART | QTY | DESCRIPTION | | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | --- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | | | 1 | M3 NYLON SPACER KIT 180PCS. | | | 1 |

M2/M2.5/M3 SCREW FASTENER KIT FOR WLTOYS 144001 1/14 RC

(Add what kind of screws are in there in the picture or add a note in the screw box)

| | ![](https://396338415-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FU93yDWZcgjXGgsC1Duqv%2Fuploads%2FAbDOQiOsrm99U8EXWr0u%2Fimage.png?alt=media\&token=de525126-fe7d-4515-a8ed-c118eafc9e99) | 3 |

JST-GH 6-pin

To

JST-XH 4-pin

4 wires, 50mm wire

(Color codes for different but nearly similar connector types?)

| | | 1 | NavQPlus | | | 1 | Camera and camera mount for NavQPlus. Most of the time already connected to the NavQPlus | | | 1 |

Power-Delivery Board (PDB)

Should be already attached to the B3RB under body.

| | | |

MUK mechanical upgrade kit:

|