WITB MR-B3RB-BMF

What's in the box — Base Mechanical Frame Components

Base Mechanical Frame Diagrams

B3RB - Outside Box

B3RB - Inside Box

B3RB - (Left) Side View

B3RB - Front View

B3RB - (Right) Side View

B3RB - Back View

Base Mechanical Frame Components

S.No.	Item Number	Description	Quantity
1	901-10008	HW ACCESSORY, WLTOYS WL124017 CAR WITHOUT RADIO CONTROLLER, WITHOUT BATTERY AND WITHOUT RADIO RECEIVER and 1:12 Electric 4WD Climbing Car Instruction Manual for Model No. 124017 and USB Charger KX7V4-200 7.4V 2S with 3 Pin Connector	1
2	901-77273	HW ACCESSORY, J-LINK EDU MINI DEBUGGER	1
3	700-31354	PWA, DCD-LZ-ADAPT	1
4	600-77370	CABLE, USB-TTL, FTDI TTL-232R-3V3, 6 PIN CONNECTOR, +3.3V, 0.70 M	1
5	901-77364	RC TOOLS 7 IN 1 HEX SCREWDRIVER SET HEXAGONAL	1
6	280-77408	PRE-CUT DOUBLE-SIDED FOAM SQUARES - 1/16" thick, 1/2 x 1/2"	10
7	901-77659	HW ACCESSORY RC XT60 FEMALE TO MALE DEANS T PLUG ADAPTER	1
8	600-77612	CABLE TIES, BLACK UV STABILIZED NYLON - 4", 18 LB	10
9	700-47472	PX4ARMINGBRD Board	1
10	600-77546	Cable for PX4ARMINGBRD (10-Pin JST-GH)	1
11	901-10005	HW ACCESSORY, DIRECT TIME OF FLIGHT LIDAR	1
12	280-10004	FASTENER, SCREW M2.5x10MM BLACK HEX SOCKET HEAD CAP	3
13	280-10006	NUT, M2.5 x 0.45MM NYLON INSERTED HEX SELF LOCK NUT, BLACK ZINC PLATED, DIN985	3
14	280-10007	FASTENER, SCREW M3 X 0.5 X 8.0MM LONG, HEX DRIVE, BUTTON HEAD, PASSIVATED 18-8 SS	3
15	280-10008	NUT, M3 X 0.5 X 4MM NYLON INSERTED HEX SELF LOCK NUT, BLACK ZINC PLATED	3
16	280-10009	FASTENER, SCREW M3 X 0.5 X 5.0MM LONG, HEX DRIVE, BUTTON HEAD, PASSIVATED 18-8 SS	16
17	280-10012	FASTENER, SCREW M3 X 0.5 X 10MM LONG, HEX DRIVE, SOCKET HEAD, 18-8 SS	8
18	280-10013	FASTENER, SCREW M3 X 0.5 X 14MM LONG, HEX DRIVE, SOCKET HEAD, 18-8 SS	4
19	280-10014	FASTENER, SCREW M2.5 X 0.5 X 8MM LONG, PHILLIPS, FLAT HEAD TAPPING, 18-8 SS	4
20	805-77575	THE HOVERGAMES; COLOR LABEL Die Cut Sticker: 3.0" X 2.91"	1
21	805-10002	LABEL, COGNIPILOT SMALL LOGO STICKER, 1" X 1"	2
22	805-10001	LABEL, NXP COLOR LOGO STICKER, 75MM" X 30MM	1
23	805-10003	LABEL, COGNIPILOT LARGE LOGO STICKER, 50MM X 30MM	1
24	901-77605	HW ACCESSORY, M3 NYLON SPACER KIT 180PCS M3 NYLON M-F HEX SPACERS SCREW NUT ASSORTMENT SET	1
25	901-77606	HW ACCESSORY, M2/M2.5/M3 SCREW FASTENER KIT FOR WLTOYS 144001 1/14 RC	1
26	600-10006	CABLE, SERVO EXTENSION LEAD WIRING CABLE MALE TO MALE, 300 MM	2
27	600-77359	CABLE, CUSTOM FOR DCD-LZ-ADAPT, 7 POSITION, JST-GH CONNECTOR, 100 MM	1
28	901-10012	HW ACCESSORY, XT60 PANEL MOUNT ADAPTER	1
29	600-10009	CABLE, CUSTOM PDB TO CANHUBK3 CABLE, 6 POSITION, JST-CH CONNECTOR, 10 INCHES	1
30	590-10002	FOAM, BLOCK 400MM WIDTH 600MM LENGTH X 200MM THICKNESS	1
31	280-77781	FASTENER STANDOFFS 6x35MM & (TOP/BOTTOM) 3MMx5 SOCKET HEAD	1

Description of Components

J-Link EDU MINI DEBUGGER

J-Link EDU MINI DEBUGGER Diagrams

J-Link EDU MINI DEBUGGER Components

J-Link EDU MINI DEBUGGER Components

S.No.	Description	Quantity
1	J-Link EDU Mini	1
2	10-Pin 2x5 Socket-Socket IDC (SWD) Ribbon Cable	1
3	Micro-USB (Male) to USB-A (Male) Cable	1
4	20-Pin 2x10 Socket-Socket IDC (SWD) Ribbon Cable	1

M3 NYLON SPACER KIT 180PCS M3 NYLON M-F HEX SPACERS SCREW NUT ASSORTMENT SET (S.No. 24)

M3 SPACER KIT Outside View

M3 SPACER KIT Inside View

M2/M2.5/M3 SCREW FASTENER KIT FOR WLTOYS 144001 1/14 RC (S.No. 25)

SCREW FASTENER KIT Outside View

SCREW FASTENER KIT Inside View

MR-B3RB-PDB (Power Distribution Board)

MR-B3RB-PDB Close-Up

MR-B3RB-PDB Assembled

"THE HOVERGAMES" (S.No. 20), "NXP" (S.No. 22) and "COGNIPILOT" (S.No. 23, 21)Stickers, Cable Ties (S.No. 8); PRE-CUT DOUBLE-SIDED FOAM SQUARES (S.No. 6)

"THE HOVERGAMES", "NXP" and "COGNIPILOT" Stickers, Cable Ties, PRE-CUT DOUBLE-SIDED FOAM SQUARES

DCD-LZ-ADAPT (S.No. 3); 7 POSITION JST-GH CONNECTOR (100 MM) (S.No. 27); XT60 FEMALE TO MALE DEANS T PLUG ADAPTER (S.No. 7)

DCD-LZ-ADAPT, 7 POSITION JST-GH CONNECTOR (100 MM); XT60 FEMALE TO MALE DEANS T PLUG ADAPTER

CABLE, CUSTOM PDB TO CANHUBK3 (S.No. 29); CABLE, USB-TTL, FTDI TTL-232R-3V3 (S.No. 4); CABLE, SERVO EXTENSION LEAD WIRING CABLE MALE TO MALE, 300 MM (S.No. 26)

NOTE <TODO> 1) The image shows the incorrect cable for item #26. this is a servo extension cable which is MALE-FEMALE and it is already attached to the B3RB. There is only one of this Male-Female Cable. Note the naming of 600-10006 "CABLE, SERVO EXTENSION LEAD WIRING CABLE MALE TO MALE, 300 MM" is in fact correct. These cables are used to jumper between the pin headers on the PDB and the MR-CANHUBK344

CABLE, USB-TTL, FTDI TTL-232R-3V3 (S.No. 4)

CABLE, SERVO EXTENSION LEAD WIRING CABLE MALE TO MALE, 300 MM

CABLE, CUSTOM PDB TO CANHUBK3 (S.No. 29)

XT60 PANEL MOUNT ADAPTER (S.No. 28)

XT60 PANEL MOUNT ADAPTER Picture 1

XT60 PANEL MOUNT ADAPTER Picture 2

FASTENER, SCREW M3 X 0.5 X 5.0MM, HEX DRIVE, BUTTON HEAD (S.No. 16); FASTENER, SCREW M3 X 0.5 X 10MM, HEX DRIVE, SOCKET HEAD (S.No. 17); FASTENER SCREW M3 X 0.5 X 14MM, HEX DRIVE, SOCKET HEAD (S.No. 18); FASTENER, SCREW M2.5 X 0.5 X 8MM LONG, PHILLIPS (S.No. 19); FASTENER, SCREW M3 X 0.5 X 8.0MM LONG, HEX DRIVE, BUTTON HEAD (S.No. 14); NUT, M3 X 0.5 X 4MM NYLON INSERTED HEX SELF LOCK NUT, BLACK ZINC PLATED (S.No. 15)

FASTENER, SCREW M3 X 0.5 X 5.0MM, HEX DRIVE, BUTTON HEAD (S.No. 16); FASTENER, SCREW M3 X 0.5 X 10MM, HEX DRIVE, SOCKET HEAD (S.No. 17); FASTENER SCREW M3 X 0.5 X 14MM, HEX DRIVE, SOCKET HEAD (S.No. 18); FASTENER, SCREW M2.5 X 0.5 X 8MM LONG, PHILLIPS (S.No. 19); FASTENER, SCREW M3 X 0.5 X 8.0MM LONG, HEX DRIVE, BUTTON HEAD (S.No. 14); NUT, M3 X 0.5 X 4MM NYLON INSERTED HEX SELF LOCK NUT, BLACK ZINC PLATED (S.No. 15)

1:12 Electric 4WD Climbing Car Instruction Manual for Model No. 124017; USB Charger KX7V4-200 7.4V 2S with 3 Pin Connector

PX4ARMINGBRD

PX4ARMINGBRD Board (S.No. 9); Cable for PX4ARMINGBRD, 10-Pin JST-GH to 10-Pin JST-GH (S.No. 10)

PX4ARMINGBRD Board and Cable for PX4ARMINGBRD

RC TOOLS 7 IN 1 HEX SCREWDRIVER SET HEXAGONAL (S.No. 5)

RC TOOLS 7 IN 1 HEX SCREWDRIVER SET HEXAGONAL