(optional) Tie wrap wires
After connecting all the cables, proceed to attach the metal board frame to the robot car using the screws you removed at the beginning of this tutorial:
Please attach the plastic shield with the camera housing to the robot's front using 1cm M2.5 screws, which are located in this box provided:#m2-m2.5-m3-screw-fastener-kit-for-wltoys-144001-1-14-rc-s.no.-25.
For reference, a picture of the screws is displayed here: <<<TODO - these are not the correct screws. They should be flat head (tapered head> screws. Take picture and add here>>>
The mounting must look like these pictures:
And the attach the back plastic shield of the robot with the same screws:
