This step is recommended after programming and you can even use the top cover as a
When you programmed the B3RB, you can start with the following step.
<<<<TODO - update the pictures below. The orientation of the LIDAR is backward!!!>>>
Attach the arch metal upper plate and the Lidar with 4 of the screws M3 X 0.5 X 10MM with socket head, labelled with the number six in the following picture:
It should look like this:
And the connection to the NavQPlus, as explained in #lidar-connection is depicted in this image:
METAL UPPER
LIDAR,
FINAL TOUCHES AND STICKERS
