1 of 1

MR-CAN-ADAP

(DRAFT)

Please see the assembly video for installation location.

This board connects on top of the MR-CANHUBK344. It should be relatively obvious how it pushes on top . Additional detail will be provided here at a later date.

Installation
- Locate as shown in the video. At the rear of the top plate, just in front of the GPS mount.
- Use double sided adhesive tape supplied, or at least two M3 screws attaching it from the bottom to the top plate.
Compass orientation
- Arrow on silkscreen indicates the forward orientation of the onboard magnetometer/compass. Please attach the assembled MR-CANHUBK344 + CAN-ADAP so that the arrow is pointing to the front.

MR-CAN-ADAP

(DRAFT)

Please see the assembly video for installation location.

This board connects on top of the MR-CANHUBK344. It should be relatively obvious how it pushes on top . Additional detail will be provided here at a later date.

Installation
- Locate as shown in the video. At the rear of the top plate, just in front of the GPS mount.
- Use double sided adhesive tape supplied, or at least two M3 screws attaching it from the bottom to the top plate.
Compass orientation
- Arrow on silkscreen indicates the forward orientation of the onboard magnetometer/compass. Please attach the assembled MR-CANHUBK344 + CAN-ADAP so that the arrow is pointing to the front.