After connecting all the cables, proceed to attach the metal board frame to the robot car using the screws you removed at the beginning of this tutorial:
Please attach the plastic shield with the camera housing to the robot's front using 1cm M2.5 screws, which are located in this box provided:#m2-m2.5-m3-screw-fastener-kit-for-wltoys-144001-1-14-rc-s.no.-25.
For reference, a picture of the screws is displayed here: <<<TODO - these are not the correct screws. They should be flat head (tapered head> screws. Take picture and add here>>>
The mounting must look like these pictures:
And the attach the back plastic shield of the robot with the same screws:
<<<<TODO - update the pictures below. The orientation of the LIDAR is backward!!!>>>
Attach the arch metal upper plate and the Lidar with 4 of the screws M3 X 0.5 X 10MM with socket head, labelled with the number six in the following picture:
It should look like this:
And the connection to the NavQPlus, as explained in #lidar-connection is depicted in this image:
METAL UPPER
LIDAR,
FINAL TOUCHES AND STICKERS
The screws below and nylon locking nuts are included in the LIDAR box. Use these to attach the LIDAR to the LIDAR Arch.
Attach the arch metal upper plate and the Lidar with 4 of the screws M3 X 0.5 X 10MM with socket head, labelled with (6) in the following picture:
The connection to the NavQPlus is shown above, and also explained in #lidar-connection
<<<TODO - move the lidar connection link details to this single page. Delete the other references>>
