# NXP-AIM

## NXP-AIM

- [Introduction to AIM 2024](https://nxp.gitbook.io/nxp-aim/readme.md)
- [Installation of AIM 2024 software stack](https://nxp.gitbook.io/nxp-aim/installation-of-nxp-aim-setup.md): Guide to install setup for NXP AIM CUP CHALLENGE.
- [Running of AIM 2024 software stack](https://nxp.gitbook.io/nxp-aim/running-simulation.md): Guide to run simulation setup for NXP AIM CHALLENGE.
- [Updating Code Base for AIM 2024](https://nxp.gitbook.io/nxp-aim/updating-code.md)
- [Adding Obstacles in simulation](https://nxp.gitbook.io/nxp-aim/adding_obstacles.md)
- [Execute AIM 2024 (Automation Setup)](https://nxp.gitbook.io/nxp-aim/start-aim-setup.md)
- [Code Overview for AIM 2024 software stack](https://nxp.gitbook.io/nxp-aim/code-overview.md): A line follower project for NXP MR-B3RB (Mobile Robotics Buggy 3 Rev B) for participants of AIM 2024.
- [Sample World for Regional Finale](https://nxp.gitbook.io/nxp-aim/sample-world-regional.md)
- [Debugging with Foxglove](https://nxp.gitbook.io/nxp-aim/debugging-with-foxglove.md)
- [Introduction to NXP AIM HW Buggy kit](https://nxp.gitbook.io/nxp-aim/kitdescription.md)
- [NXP AIM Kit Assembly Steps](https://nxp.gitbook.io/nxp-aim/buggyassembly.md)
- [NXP AIM Kit Assembly Support Videos](https://nxp.gitbook.io/nxp-aim/videos.md)
- [Deployment of Code on NXP AIM Kit](https://nxp.gitbook.io/nxp-aim/release-notes-for-hardware-buggy.md)
- [Create Your Own Physical Sample Track](https://nxp.gitbook.io/nxp-aim/sample_track_grandfinale.md)
- [Access Manual Mode of Buggy via Foxglove](https://nxp.gitbook.io/nxp-aim/manual_mode.md)
- [NXP AIM Kit Firmware Installation Videos](https://nxp.gitbook.io/nxp-aim/video_installation_on_boards.md)
- [Data Set For NXP AIM](https://nxp.gitbook.io/nxp-aim/dataset.md)
- [Evaluation Platform For Grand Finale](https://nxp.gitbook.io/nxp-aim/grand_finale_evaluation.md)
- [Debugging with Foxglove](https://nxp.gitbook.io/nxp-aim/debugging-with-foxglove-1.md): This tutorial describes how to perform debugging using Foxglove.