This page will give more information about the display
The display shows all kinds of battery information presented on an optional local I2C LCD display (e.g. SSD1306 type). The display should be connected to J23.
Both 3.3V and 5V are supported for the display. You can change the display voltage. For example to enable 3.3V on the display connector J23, make sure D34 is placed and D35 is not placed! If the diode D35 is placed, move the diode placed on D35 and place it on D34.
There is a framebuffer which makes sure the data is transferred to the display. Information like SoC, SoH, output status, BMS mode, battery voltage, average current, temperature and ID can be seen on the display.