Pixhawk 6X-RT (FMURT7) - IMPORTANT change 10/26/2023
Update 10/26/2023
Dear Pixhawk 6X-RT testers (all on Bcc),
This change notice is due to the change of the PX4 build target name of 6X-RT to its final name px4_fmu-v6xrt
The PX4 development branch has been changed to pr-px4_fmu-v6rt. Please checkout this branch and use for building the PX4 FW from now on.
Steps to update
Within your PX4-Autopilot git directory do the following
git checkout pr-px4_fmu-v6rt
git pull –recurse-submodules
Connect the Pixhawk 6X-RT FMU via USB to your PC
IMPORTANT - There is hard fault logging enabled at the moment in this branch. If you are flight testing the FMU please switch that off with “CONFIG_DEBUG_ASSERTIONS=n” within “boards/nxp/fmurt1170-v1/nuttx-config/nsh/defconfig” before building the code (before step 4)!!
PX4 Autopilot PR reporting
All important information / issues will be reported on the related PR -
We kindly ask you to report any issues found yourself on PX4 git with an issue report! Please tag in this case
Flight log reporting
With any flight testing please always upload your logs to
enable “Allow this log file to be used for statistical analysis”
upload the ogfile to
upload the LINK to the logfile to PR 22263 -
Thank you!
(This is assuming you have PX4 bootloader already flashed – as it was done for all handed out devices on PX4 dev summit)
Do make px4_fmu-v6rt_bootloader upload
At the end of the build process the bootloader will be uploaded via USB
Do make px4_fmu-v6rt_default upload
At the end of build process PX4 FW will be uploaded via USB