B3RB is a kit of kits
MR-B3RB is a kit of kits. That means it is built up as a series of other part numbers that are packaged together to define few different sub-kits and final kits. This allows for a mix and match approach internally to provide few different final variants. Only the final part numbers are available for sale on NXP.com, but you may find references to the sub-kits and internal kits in the documentation. In case this becomes confusing, we thought it best to explain the internal and external names here.
Most Mobile Robotics part numbers/name will start with "MR-"
The following part number/naming are internal and not normally for sale separately.
| P/N | Title | Description |
|---|---|---|
The following part number/naming are the assembled kit of kits that include the following. Other variety of kit combinations may be available in the future with different names, check https://www.nxp.com/mr-b3rb or https://www.nxp.com/mr-buggy3 for orderable part numbers
| P/N | Title | Description |
|---|---|---|
MR-B3RB-S
Small (Standard) Buggy3 RevB
MR-B3RB-BMF + NavQPlus incl. Camera, MR-CANHUBK344, MR-CANHUB-ADAP
MR-B3RB-M
Medium (Main) Buggy3 RevB
MR-B3RB-S , MR-B3RB-MUK GPS, LIDAR
MR-B3RB-(-Other, -MAX)
Other configuration mix of components will follow similar naming.
Please request for specific needs. We are considering additional kits for specific competition, and a -MAX kit with everything and anything that could connect. (BMS, RADAR, UWB, Long Range Radios etc.)
MR-B3RB-BMF, "BMF"
Base Mechanical Frame
RC model, Motor/ESC/Encoder, Metal upper frame, RGB LEDS, partial cables/wires. MR-B3RB-PDB
MR-CANHUB-ADAP
Adapter board for MR-CANHUBK344
Adds IMU, regulators, reset button, connectors for GPS, I2C (StemmaQT), RC input, SDCARD expander
MR-B3RB-PDB ,"PDB"
Power Distribution Board
Power in from XT60 battery, regulated power out to boards, connectors bridging motor PWM and encoder and out to CANHUBK344, 5V Power for PWM servo rail
MR-B3RB-MUK, "-MUK"
Mechanical Upgrade Kit
Pretty upgrades with plastic front, rear, side plates, covers for LEDs, mount for Camera, Lidar "arch", decorative top cover, skirts and thumbscrews.
MR-LIDAR-STL-27, "Lidar"
Lidar
Model STL-27 Lidar and cable