"THE HOVERGAMES" (S.No. 20), "NXP" (S.No. 22) and "COGNIPILOT" (S.No. 23, 21)Stickers, Cable Ties (S.No. 8); PRE-CUT DOUBLE-SIDED FOAM SQUARES (S.No. 6)
DCD-LZ-ADAPT (S.No. 3); 7 POSITION JST-GH CONNECTOR (100 MM) (S.No. 27); XT60 FEMALE TO MALE DEANS T PLUG ADAPTER (S.No. 7)
CABLE, CUSTOM PDB TO CANHUBK3 (S.No. 29); CABLE, USB-TTL, FTDI TTL-232R-3V3 (S.No. 4); CABLE, SERVO EXTENSION LEAD WIRING CABLE MALE TO MALE, 300 MM (S.No. 26)
NOTE <TODO>
1) The image shows the incorrect cable for item #26. this is a servo extension cable which is MALE-FEMALE and it is already attached to the B3RB.
There is only one of this Male-Female Cable.
Note the naming of 600-10006 "" is in fact correct. These cables are used to jumper between the pin headers on the PDB and the MR-CANHUBK344
XT60 PANEL MOUNT ADAPTER (S.No. 28)
FASTENER, SCREW M3 X 0.5 X 5.0MM, HEX DRIVE, BUTTON HEAD (S.No. 16); FASTENER, SCREW M3 X 0.5 X 10MM, HEX DRIVE, SOCKET HEAD (S.No. 17); FASTENER SCREW M3 X 0.5 X 14MM, HEX DRIVE, SOCKET HEAD (S.No. 18); FASTENER, SCREW M2.5 X 0.5 X 8MM LONG, PHILLIPS (S.No. 19); FASTENER, SCREW M3 X 0.5 X 8.0MM LONG, HEX DRIVE, BUTTON HEAD (S.No. 14); NUT, M3 X 0.5 X 4MM NYLON INSERTED HEX SELF LOCK NUT, BLACK ZINC PLATED (S.No. 15)
1:12 Electric 4WD Climbing Car Instruction Manual for Model No. 124017; USB Charger KX7V4-200 7.4V 2S with 3 Pin Connector
PX4ARMINGBRD
PX4ARMINGBRD Board (S.No. 9); Cable for PX4ARMINGBRD, 10-Pin JST-GH to 10-Pin JST-GH (S.No. 10)
RC TOOLS 7 IN 1 HEX SCREWDRIVER SET HEXAGONAL (S.No. 5)
PWA,
1
4
600-77370
1
5
901-77364
1
6
280-77408
10
7
901-77659
1
8
600-77612
10
9
700-47472
1
10
600-77546
1
11
901-10005
HW ACCESSORY, DIRECT TIME OF FLIGHT LIDAR
1
12
280-10004
FASTENER, SCREW M2.5x10MM BLACK HEX SOCKET HEAD CAP
3
13
280-10006
NUT, M2.5 x 0.45MM NYLON INSERTED HEX SELF LOCK NUT, BLACK ZINC PLATED, DIN985
3
14
280-10007
3
15
280-10008
3
16
280-10009
16
17
280-10012
8
18
280-10013
4
19
280-10014
4
20
805-77575
1
21
805-10002
2
22
805-10001
1
23
805-10003
1
24
901-77605
1
25
901-77606
1
26
600-10006
2
27
600-77359
1
28
901-10012
HW ACCESSORY,
1
29
600-10009
1
30
590-10002
FOAM, BLOCK 400MM WIDTH 600MM LENGTH X 200MM THICKNESS
1
31
280-77781
FASTENER STANDOFFS 6x35MM & (TOP/BOTTOM) 3MMx5 SOCKET HEAD
"THE HOVERGAMES", "NXP" and "COGNIPILOT" Stickers, Cable Ties, PRE-CUT DOUBLE-SIDED FOAM SQUARES
DCD-LZ-ADAPT, 7 POSITION JST-GH CONNECTOR (100 MM); XT60 FEMALE TO MALE DEANS T PLUG ADAPTER
CABLE, USB-TTL, FTDI TTL-232R-3V3 (S.No. 4)
CABLE, SERVO EXTENSION LEAD WIRING CABLE MALE TO MALE, 300 MM
CABLE, CUSTOM PDB TO CANHUBK3 (S.No. 29)
XT60 PANEL MOUNT ADAPTER Picture 1
XT60 PANEL MOUNT ADAPTER Picture 2
FASTENER, SCREW M3 X 0.5 X 5.0MM, HEX DRIVE, BUTTON HEAD (S.No. 16); FASTENER, SCREW M3 X 0.5 X 10MM, HEX DRIVE, SOCKET HEAD (S.No. 17); FASTENER SCREW M3 X 0.5 X 14MM, HEX DRIVE, SOCKET HEAD (S.No. 18); FASTENER, SCREW M2.5 X 0.5 X 8MM LONG, PHILLIPS (S.No. 19); FASTENER, SCREW M3 X 0.5 X 8.0MM LONG, HEX DRIVE, BUTTON HEAD (S.No. 14); NUT, M3 X 0.5 X 4MM NYLON INSERTED HEX SELF LOCK NUT, BLACK ZINC PLATED (S.No. 15)
