Using the command line interface (CLI)

This page will tell you how to use the CLI of the BMS

To use the command line interface, connect the debugger to the BMS using the 7-pin JST-GH connector from the debug adapter board to J19 and plug the USB coming from the debugger converter board into your computer. Open a UART terminal like minicom on a Linux machine or PuTTY or Tera Term for a windows machine.

Type “bms help” to get the help for the CLI. The CLI works only with lowercase commands. The settings are:

• 115200 Baud

• 8 data bits

• 1 stop bit