# DEMO: UCANS32K1SIC Hardware setup

DRAFT

Show image of PC with USB - UART cable(s) and USB mini power cable connected to CAN-TERM-BRD.\
Show two UCAN boards connected via the CAN wires. The CAN-TERM boards should be at either end. only one CAN-TERM board should provide 5V power via some USB-Micro cable connection.

NOTE - USB-Micro cable is not included.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://nxp.gitbook.io/ucans32k1/ucans32k1sic-demo-application/demo-ucans32k1sic-hardware-setup.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.