> For the complete documentation index, see [llms.txt](https://nxp.gitbook.io/ucans32k1/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://nxp.gitbook.io/ucans32k1/ucans32k1sic-demo-application/demo-ucans32k1sic-introduction.md).

# Demo: UCANS32K1SIC Introduction

A sample application based on PX4/NuttX has been prepared that can be flashed to the UCANS32K1SIC boards. The basic premise is to form a two node CAN-FD network, and give you a console terminal available on each board using

 the UART/USB cable connected to your PC.

\
Simple commands can be issued on each node to initiate CAN-FD communications. 

The UCAN boards will be powered via 5V injected through he CAN-TERM board microUSB connection.