Wiring M10 GPS module

Introduction

The GPS module is primarily used to provide the Magnetometer, sound and SAFETY button for the system. Not all systems will use the GPS localization functionality. The software however is capable of using the use of GPS position data for navigation outdoors.

An ARMING board is also included in the kit and can be used with alternative software. This can provide the safety button and sound functionality, but not the Magnetometer needed for robotics navigation using Cognipilot.

M10 GPS connection

You need to add first the M10 GPS mount to the metal frame. This is explained in the section Install M10 GPS Module

The M10 GPS cable attaches to the MR-CANHUBK344 as shown below

M10 GPS

Connector on MR-CANHUBK344 for GPS