> For the complete documentation index, see [llms.txt](https://nxp.gitbook.io/mr-canhubk344/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://nxp.gitbook.io/mr-canhubk344/getting-started.md).

# Getting Started

First few steps to setting up your MR-CANHUBK3 board

## Powering up the board

MR-CANHUBK344 should be powered through connector P27, or alternatively through header P28. P27 is a 5-pin JST-GH connector. Pin 1 has been indicated by the yellow triangle in the picture below. A voltage between +5 and +40V should be applied to pins 1-2, while pins 4-5 are GND. Pin 3 is not connected. The polarity of header P28 is also indicated below.

<figure><img src="https://4107432906-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FtwBzyvivLuBKj9SMDwV9%2Fuploads%2FVBvHXJV8uD6lgWmDDbsp%2Fimage.png?alt=media&amp;token=df3b830e-4a91-4fe4-9ba3-85a40bd03d14" alt=""><figcaption></figcaption></figure>