Step 6: Attach top cover

This step is recommended after programming and you can even use the top cover as a

When you programmed the B3RB, you can start with the following step.

Top cover

<<<<TODO - update the pictures below. The orientation of the LIDAR is backward!!!>>>

Attach the arch metal upper plate and the Lidar with 4 of the screws M3 X 0.5 X 10MM with socket head, labelled with the number six in the following picture:

It should look like this:

And the connection to the NavQPlus, as explained in Lidar connection is depicted in this image:

Decorative top cover

METAL UPPER

LIDAR,

FINAL TOUCHES AND STICKERS

Last updated

Was this helpful?