MR-CAN-ADAP

(DRAFT)

Please see the assembly video for installation location.

This board connects on top of the MR-CANHUBK344. It should be relatively obvious how it pushes on top . Additional detail will be provided here at a later date.

  • Installation

    • Locate as shown in the video. At the rear of the top plate, just in front of the GPS mount.

    • Use double sided adhesive tape supplied, or at least two M3 screws attaching it from the bottom to the top plate.

  • Compass orientation

    • Arrow on silkscreen indicates the forward orientation of the onboard magnetometer/compass. Please attach the assembled MR-CANHUBK344 + CAN-ADAP so that the arrow is pointing to the front.

Last updated