# Camera Mount

## Camera Mount

First, mount the camera to the small bracket by using the white screws and the distance nuts. After that the hinge can be attached to the bracket with the long screw and a nut. Mount the last screw on the other side of the hinge. Connect the camera cable on one side the the board and on the other side with a connector for the FRDM-KL25Z (small board with 5 connectors on one side and a connector for the camera cable on the other side). Make sure that the connectors of the camera cable matches with the connectors of the  boards. Throw the middle of the hinge the rod can be placed and with the screw you can fix the camera on the top of the rod. The camera cable can be wrapped around the rod.

![camera mount](/files/-LVx8CTYLgc7hr2m1ZNv)

## Camera mount on chassis

Fix the camera mount holder on the chassis.

![camera mount on chassis](/files/-LVxA2QkiEn9955CXbho)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://nxp.gitbook.io/nxp-cup/2019-dfrobot-chassis-developer-guide/landzo-car-model/assembly/model-alamak-with-frdm-kl25z/assembly-camera-mount.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.