# Step 5: Install Mounting PCB

## Task 1: Install standoffs

For this step you will need the M3x5mm screws, the two PCBs, and the purple standoffs.

![](/files/PFFWnjNjcbn4b7C3sDnR)

Mount the standoffs using the M3x5mm screws like so:

![](/files/CBqBIn8OCkhnV0OGdkU0)

## Task 2: Install PCB to Buggy

Attach this "lower" PCB to the buggy. In the rear,  reuse the wing, the screws, and the wing black plate, and on the front use two M3x5mm screws.

![](/files/XLAu6lViXgAJJZPlQpwE)

![](/files/RKbig8lZcm2SJtYwY541)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://nxp.gitbook.io/nxp-cup/2022-mr-buggy3-developer-guide/mr-buggy3-build-guide/step-5-install-mounting-pcb.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.