# Board Mounting Holes

We have discovered that only two of the mounting holes may line up correctly on the ALAMAK frame.

* [ ] This board was originally designed for the Laandzo model B and C frames which have since been replaced by the ALAMAK model
* [ ] \<ToDo: add picture here>
* [ ] \<ToDo: review hardware and determine the course of action. Maybe two additional holes will need to be drilled. Provide instruction on how to do this?>

## On Landzo Model C the Power distribution board would mount using the holes shown below.

![](https://2412084329-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-L9GLtaxrQtBdBRsFIJB%2F-L9GLxcCe4ljqSJyYFV2%2F-L9GM4XM_TbN0HK2qBDA%2FLandzo-TFC-MODEL_C_Mounting.png?generation=1522857196443378\&alt=media)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://nxp.gitbook.io/nxp-cup/2019-dfrobot-chassis-developer-guide/landzo-car-model/known-issues/board-mounting-holes.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.