# Installing Motor Driver Board

## Motor Driver Board on chassis

![motor driver board on chassis](/files/-LVwwnUhjuWTpz0n5QzT)

## Motor Driver Board mounting

Mount the motor driver board in the middle of the chassis. The two arrows on the motor driver board must point to the front of the chassis. To make sure the board is in place, you can attach nuts between the chassis and the board.

![motor driver board mounting](/files/-LVwxWN8nUkC1dh0nmBh)

## Motor Connectors

Connect the two motor connectors to the motor driver board. 

![motor connectors](/files/-LVwy-7hw1CddG-4TZ-y)

## Power Connections

Connect the power connection cable to the terminal. 

![](/files/-LVx1qAo3hngfN_o-xJV)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://nxp.gitbook.io/nxp-cup/2019-dfrobot-chassis-developer-guide/landzo-car-model/assembly/model-alamak-with-frdm-kl25z/assembly-motor-driver-board.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.