# Step 9: Installing top PCB

After attaching the FMU, GPS, and camera mount to the top PCB, it is now time to install it on the buggy. Gather the M3x5mm screws and your top PCB like so:

![](/files/DLXuErxEeN8ll3wYii36)

and install it on top of the standoffs. You can now move on to step 10!


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://nxp.gitbook.io/nxp-cup/2022-mr-buggy3-developer-guide/mr-buggy3-build-guide/step-9-installing-top-pcb.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.